Juniper 1-Port Serial Mini-PIM Spécifications télécharger pdf (Page 83)

Using the CLI

To perform basic configuration for the 1-Port G.SHDSL 8-Wire Mini-PIM and to configure

network interfaces for the services gateway with the CLI:

•

Verify that the G.SHDSL interface is installed on the device:

show chassis hardware

•

Verify the status of the interface:

show interfaces terse

•

Assign the port an IP address:

set interfaces at-1/0/0 unit 0 family inet address Interface address/destination prefix

•

Add or select a security zone; for example, Trust:

set security zones security-zone trust interfaces at-1/0/0.0 host-inbound-traffic

system-services all

•

Add or select security zones for host inbound traffic options protocols:

set security zones security-zone trust interfaces at-1/0/0.0 host-inbound-traffic protocols

all

•

Set security policies:

set security policies default-policy permit-all

See the Junos OS Network Interfaces Configuration Guide for more details.

Chapter 6: 1-Port G.SHDSL 8-Wire Mini-Physical Interface Module

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 263 264

Pas de commentaire

Juniper 1-Port Serial Mini-PIM Spécifications Page 83