Juniper 1-Port Serial Mini-PIM Spécifications télécharger pdf (Page 182)

•

Verify that the Quad CT1/E1 GPIM is installed on the services gateway:

show chassis hardware

•

Verify the FPC status of the interface:

show chassis fpc

•

Configure the parent CE1 interface with no partitioning:

set interfaces ce1-1/0/0 no-partition interface-type e1

•

Configure the child E1 interface and assign an IP address:

set interfaces e1-1/0/0 unit 0 family inet address ip4–address/prefix

•

Assign MTU values to the child E1 interface:

set interfaces e1-1/0/0 unit 0 mtu mtu values

•

Configure a security zone for the child E1 interface and set the configuration for host

inbound traffic services and protocols:

set security zones security-zone trust interfaces e1-1/0/0 host-inbound-traffic

system-services all

set security zones security-zone trust interfaces e1-1/0/0 host-inbound-traffic protocols

all

•

Set security policies:

set security policies default-policy permit-all

Documentation

• Quad CT1/E1 GPIM Overview on page 157

• Quad CT1/E1 GPIM Key Features on page 158

• Quad CT1/E1 GPIM Network Interface Specifications on page 159

• Quad CT1/E1 GPIM Hardware Specifications on page 159

• Quad CT1/E1 GPIM LEDs on page 160

• Quad CT1/E1 GPIM Components on page 161

• Installing a Gigabit-Backplane Physical Interface Module on the SRX Series Services

Gateway on page 24

SRX Series Services Gateways for the Branch Physical Interface Modules Hardware Guide

1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 263 264

Pas de commentaire

Juniper 1-Port Serial Mini-PIM Spécifications Page 182