Juniper 1-Port Serial Mini-PIM Spécifications télécharger pdf (Page 64)

Table 19: 1-Port DOCSIS Mini-PIM LEDs States (continued)

DescriptionStateColorLED

The 1-Port DOCSIS Mini-PIM scans for a valid

upstream DOCSIS channel to lock onto an

upstream channel.

BlinkingGreenUT

(Upstream)

The 1-Port DOCSIS Mini-PIM has locked onto

the DOCSIS upstream channel.

The 1-Port DOCSIS Mini-PIM has an active link

with the CPE device, but data communication

is not taking place.

BlinkingGreenLINK (to CMTS)

The 1-Port DOCSIS Mini-PIM has an active link

with the CPE device, and data communication

is taking place.

NOTE: The Link LED does not blink for data

traffic that originates or terminates at the

cable modem.

The 1-Port DOCSIS Mini-PIM is establishing a

connection to the SRX Series device.

BlinkingGreenONLINE

The 1-Port DOCSIS Mini-PIM is synchronized

with the SRX Series device.

Documentation

1-Port DOCSIS Mini-Physical Interface Module Overview on page 41•

• 1-Port DOCSIS Mini-Physical Interface Module Key Features on page 42

• 1-Port DOCSIS Mini-Physical Interface Module Supported Standards on page 43

• 1-Port DOCSIS Mini-Physical Interface Module Hardware Specifications on page 44

• 1-Port DOCSIS Mini-Physical Interface Module Network Interface Specifications on

page 43

• 1-Port DOCSIS Mini-Physical Interface Module Basic Configuration on page 46

1-Port DOCSIS Mini-Physical Interface Module Basic Configuration

To enable the Data over Cable System Interface Specifications Mini-Physical Interface

Module (1-Port DOCSIS Mini-PIM) installed on the SRX Series Services Gateway, you

must configure its properties. You can perform the same configuration tasks using either

the J-Web interface or the CLI:

•

Using the J-Web Interface on page 47

•

Using the CLI on page 47

SRX Series Services Gateways for the Branch Physical Interface Modules Hardware Guide

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 263 264

Pas de commentaire

Juniper 1-Port Serial Mini-PIM Spécifications Page 64