Juniper 1-Port Serial Mini-PIM Spécifications télécharger pdf (Page 172)

the same configuration tasks using either the J-Web interface or the CLI. In addition, you

can configure a wide variety of options that are not encountered frequently.

•

Using the J-Web Interface on page 154

•

Using the CLI to Configure the CT1 Interface on page 155

•

Using the CLI to Configure the CE1 Interface on page 155

Using the J-Web Interface

To perform basic configuration for the Dual CT1/E1 GPIM and to configure network

interfaces for the services gateway using the J-Web interface:

1. In the J-Web interface, select Configure>Interfaces>Ports.

The Interfaces page lists the network interfaces present on the services gateway.

Verify whether the interface has been configured by reviewing the information in the

Configured column (yes/no).

2. Select the name of the parent interface you want to edit.

NOTE: You must configure the parent CT1 or CE1 interface before you

configure the child T1 or E1 interface, respectively.

3. From the CT1/CE1 Interfaces General Configuration page, for the parent CT1 or CE1

interface, select no for the Partitioning field.

4. Click OK to save changes.

5. Select the name of the child interface (T1 or E1) you want to edit.

6. To use the port on the GPIM, you must assign it to a security zone other than the Null

zone. Optionally, you can also assign the port an IP address (for example,

192.168.3.1/24). Enter or select the following settings:

a. Select Configure>Security>Zones.

b. Add or select a security zone other than Null; for example, Trust.

c. For host inbound traffic, set the following:

•

System Services=Allow All

•

Protocols=Allow All

d. Click OK to save changes, and click Commit to apply the configuration and other

pending changes (if any).

7. To use the port on the GPIM, you must also set security policies. Select the following

settings:

a. Select Configure>Security>Policy>Apply Policy.

b. Set Policy Action: Default Policy Action=Permit-All.

SRX Series Services Gateways for the Branch Physical Interface Modules Hardware Guide

1 2 ... 167 168 169 170 171 172 173 174 175 176 177 ... 263 264

Pas de commentaire

Juniper 1-Port Serial Mini-PIM Spécifications Page 172