Juniper 1-Port Serial Mini-PIM Spécifications télécharger pdf (Page 206)

1-Port G.SHDSL 8-Wire Mini-PIM Wire Modes

The 1-Port G.SHDSL 8-wire Mini-Physical Interface Module (Mini-PIM) requires different

combination of RJ-45 cables depending upon the connection available on the patch

panel.

Table 84 on page 188 lists the cables that you can order from Juniper Networks to connect

the 1-Port G.SHDSL 8-Wire Mini-PIM.

Table 84: 1-Port G.SHDSL 8-Wire Mini-PIM Cable Part Numbers

DetailsConnections

Standard RJ-45 connector1X8-wire

RJ-45 connector that connects to two RJ-11 connectors

(SRX-CBL-RJ45-2RJ11).

NOTE: The SRX-CBL-RJ45-2RJ11 is not shipped with the

G.SHDSL Mini-PIM and must be ordered separately.

2X4-wire

RJ-45 connector that connects to four RJ-11 connectors

(SRX-CBL-RJ45-4RJ11).

NOTE: The SRX-CBL-RJ45-4RJ11 is shipped with G.SHDSL

Mini-PIM.

4X2-wire

The following topology diagrams show different G.SHDSL 8-Wire Mini-PIM connections.

Figure 41 on page 188 shows the topology for a G.SHDSL 8-Wire Mini-PIM operating in

2X4-wire mode.

Figure 41: G.SHDSL Mini-PIM Operating in 2X4-Wire Mode

Figure 42 on page 189 shows the topology for G.SHDSL8-Wire Mini-PIM operating in

4X2-wire mode.

SRX Series Services Gateways for the Branch Physical Interface Modules Hardware Guide

1 2 ... 201 202 203 204 205 206 207 208 209 210 211 ... 263 264

Pas de commentaire

Juniper 1-Port Serial Mini-PIM Spécifications Page 206