Juniper 1-Port Serial Mini-PIM Spécifications télécharger pdf (Page 106)

set security zones security-zone trust interfaces t1-1/0/0.0 host-inbound-traffic protocols

all

For E1 interfaces:

set security zones security-zone trust interfaces e1-1/0/0.0 host-inbound-traffic protocols

all

•

Set security policies:

set security policies default-policy permit-all

NOTE: You can use the CLI commands set interfaces t1–1/0/0 or set interfaces

e1–1/0/0 to enable the 1-Port T1/E1 Mini-PIM to function as a T1 or an E1

interface.

Documentation

• 1-Port T1/E1 Mini-Physical Interface Module Overview on page 81

• 1-Port T1/E1 Mini-Physical Interface Module Hardware Specifications on page 82

• 1-Port T1/E1 Mini-Physical Interface Module Network Interface Specifications on page 82

• 1-Port T1/E1 Mini-Physical Interface Module Supported Standards on page 83

• 1-Port T1/E1 Mini-Physical Interface Module LEDs on page 84

• 1-Port T1/E1 Mini-Physical Interface Module Supported Loopback Diagnostics on page 85

SRX Series Services Gateways for the Branch Physical Interface Modules Hardware Guide

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 263 264

Pas de commentaire

Juniper 1-Port Serial Mini-PIM Spécifications Page 106