Juniper 1-Port Serial Mini-PIM Spécifications télécharger pdf (Page 137)

CHAPTER 13

8-Port Serial GPIM

•

8-Port Serial GPIM Overview on page 119

•

8-Port Serial GPIM Hardware Specifications on page 120

•

8-Port Serial GPIM Network Interface Specifications on page 121

•

8-Port Serial GPIM Key Features on page 122

•

8-Port Serial GPIM LEDs on page 123

•

8-Port Serial GPIM Components on page 123

•

8-Port Serial GPIM Interface Cables on page 124

•

8-Port Serial GPIM Basic Configuration on page 126

8-Port Serial GPIM Overview

The 8-Port Serial Gigabit-Backplane Physical Interface Module (GPIM) is a network

interface card (NIC) that installs in the front slots of the SRX650 and SRX550 Services

Gateways to provide physical connections to a WAN. It can be plugged into all the GPIM

slots of SRX650 and SRX550 Services Gateways. After you install the GPIM in the services

gateway, you configure a network interface on the GPIM. It enhances port density and

provides flexible support for universal serial ports including a wide array of interface

options such as synchronous support.

NOTE: Only SRX650 Services Gateway supports hot-swappable functionality

for GPIMs.

All the ports of the 8-Port Serial GPIM are connected to two dual stacked 136-pin VHDCI

connectors. Custom cables are used to connect the VHDCI connectors to the data terminal

equipment (DTE) or the data circuit-terminating equipment (DCE). Different cables are

required to support different protocols. The protocols that a cable supports are identified

by the cable ID. The cables are labeled with a letter (refers to the cable type) and four

digits (unique serial numbers for the cables).

Figure 29: 8-Port Serial GPIM Front Panel

g021285

1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 263 264

Pas de commentaire

Juniper 1-Port Serial Mini-PIM Spécifications Page 137