Juniper 1-Port Serial Mini-PIM Spécifications télécharger pdf (Page 146)

Device flags : Present Running

Interface flags: Point-To-Point Internal: 0x0

Link flags : Keepalives

Hold-times : Up 0 ms, Down 0 ms

CoS queues : 8 supported, 8 maximum usable queues

Last flapped : 2012-03-01 11:07:13 PST (10:57:02 ago)

Statistics last cleared: Never

Traffic statistics:

Input bytes : 0 0 bps

Output bytes : 0 0 bps

Input packets: 0 0 pps

Output packets: 0 0 pps

Input errors:

Errors: 3, Drops: 0, Framing errors: 3, Runts: 0, Giants: 0,

Policed discards: 0, Resource errors: 0

Output errors:

Carrier transitions: 1, Errors: 0, Drops: 0, MTU errors: 0,

Resource errors: 0

Serial media information:

Line protocol: eia530a

Resync history:

Sync loss count: 0

Data signal:

Rx Clock: OK

Control signals:

Local mode: DCE

To DTE: CTS: up, DCD: up, DSR: up

From DTE: DTR: up, RTS: up

DCE loopback override: Off

Clocking mode: internal

Loopback: none

Tx clock: non-invert

Line encoding: nrz

Packet Forwarding Engine configuration:

Destination slot: 4

CoS information:

Direction : Output

CoS transmit queue Bandwidth Buffer Priority

Limit

% bps % usec

0 best-effort 95 7600000 95 0 low

none

3 network-control 5 400000 5 0 low

none

4. Assign the interface an IP address:

[edit]

user@host# set interfaces interface-name unit 0 family inet address interface

address/destination prefix

5. Add or select a security zone:

[edit]

user@host# set security zones security-zone zone-name interfaces interface-name

host-inbound-traffic system-services all

6. Add or select security zones for host inbound traffic protocol options:

[edit]

SRX Series Services Gateways for the Branch Physical Interface Modules Hardware Guide

1 2 ... 141 142 143 144 145 146 147 148 149 150 151 ... 263 264

Commentaires sur ces manuels

Pas de commentaire

Juniper 1-Port Serial Mini-PIM Spécifications Page 146

Commentaires sur ces manuels