Juniper WLA522E Guide d'installation télécharger pdf (Page 21)

Wireless LAN Access Point WLA522 and WLA522E Quick Start Guide Part Number: 530-042353 Rev.01

Junction Box Installation

1. Unlock the universal mounting bracket from the AP by inserting a small-pointed instrument or a paperclip

into the Unlock hole on the AP as shown in Figure 16.

Figure 16: Step 1—Unlocking the Bracket

2. Remove the bracket as shown in Figure 17.

Figure 17: Step 2—Removing the Bracket

3. Attach the universal mounting bracket to the junction box as shown in Figure 18:

a. Place the universal mounting bracket against the junction box so that the two screw holes face the

junction box and align over the screw holes in the box.

b. Insert the #6-32 x 1-inch machine screws in the universal mounting bracket screw holes, and use a

#2 Phillips-head screwdriver to tighten them.

Warning: Use a lock/unlock tool to unlock the AP. Do not use a screwdriver because it may cause

damage to the AP lock mechanism or electronic components. Do not use excessive force when inserting

a tool into the Unlock or Lock hole.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Pas de commentaire

Juniper WLA522E Guide d'installation Page 21