Juniper AX411 Manuel télécharger pdf (Page 11)

APPLICATION NOTE - Configuring and Deploying the AX411 Wireless Access Point

set wlan access-point AP-2 access-point-options country US

set wlan access-point AP-2 radio 1 virtual-access-point 0 ssid CorpNet

set wlan access-point AP-2 radio 1 virtual-access-point 0 security none

set wlan access-point AP-2 radio 2 virtual-access-point 0 ssid CorpNet

#AP-3

set wlan access-point AP-3 mac-address 00:12:cf:c5:4c:40

set wlan access-point AP-3 access-point-options country US

set wlan access-point AP-3 radio 1 virtual-access-point 0 ssid CorpNet

set wlan access-point AP-3 radio 1 virtual-access-point 0 security none

set wlan access-point AP-3 radio 2 virtual-access-point 0 ssid CorpNet

Segregating User and Management Trac

In this example, VLAN tags are used to separate management traffic from user traffic. This configuration can be

applied to both L2 and L3 deployment modes. From this example on, only the L2 mode will be shown (as it is the most

popular method) but it should be apparent from our previous example how to configure each scenario in L3 mode.

Figure 5: Segregating user and management traffic

INTERNET

OFFICE

vlan.1 (management)

10.0.0.1/24

vlan.2 (trust)

192.168.1.1/24-VLANID 2

Client

AP-1

00:de:ad:10:75:00

AP-2

00:de:ad:10:76:00

AP-3

00:de:ad:10:77:00

CorpNet SSID

A single broadcast SSID is advertised

SRX

Series

ge-0/0/0.0

(untrust)

198.0.0.1/24

#DHCP Server cong

set system services dhcp pool name-server 4.2.2.2

#This pool is used by the management vlan

set system services dhcp pool 192.168.1.0/24 address-range low 192.168.1.2

set system services dhcp pool 192.168.1.0/24 address-range high 192.168.1.254

set system services dhcp pool 192.168.1.0/24 router 192.168.1.1

#This pool is used by the CorpNet vlan

set system services dhcp pool 192.168.2.0/24 address-range low 192.168.2.2

set system services dhcp pool 192.168.2.0/24 address-range high 192.168.2.254

set system services dhcp pool 192.168.2.0/24 router 192.168.2.1

#Interface and VLAN Conguration.

#Since all ports connected to an AP will have identical congs we will make use

of an interface ranges.

set interfaces interface-range APs member ge-0/0/1

set interfaces interface-range APs member-range fe-0/0/2 to fe-0/0/3

set interfaces interface-range APs unit 0 family ethernet-switching port-mode

trunk

set interfaces interface-range APs unit 0 family ethernet-switching vlan members

default

set interfaces interface-range APs unit 0 family ethernet-switching vlan members

CorpNet

set interfaces interface-range APs unit 0 family ethernet-switching native-vlan-

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 22 23

Commentaires sur ces manuels

Pas de commentaire

Juniper AX411 Manuel Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Points d'accès WLAN Juniper AX411